R30 Desktop Stand for ICOM IC-R30

[tumegpc]

A custom desktop stand for the Icom R30 .

Desktop Stand for ICOM IC-R30 Hand Held Scanner/Receiver, BLACK/ SLIVER GREY | eBay

3D Printed, Desktop Stand, for your ICOM IC-R30 - Hand Held Scanner. So I lay them down on my desk which is not the best angle to view the screen and the text. I am a owner of frequency scanner's and I do try to take good care them.

www.ebay.com

 

[n9mxq]

Not as fancy, but cheaper if you can print your own, or have a friend with a printer: Icom IC-R30 holder by Migelos

 

[N1SQB]

Not as fancy, but cheaper if you can print your own, or have a friend with a printer: Icom IC-R30 holder by Migelos

I had a friend of mine with a 3D printer make one from the link you posted. Unfortunately, the file shown only has the parameters for the holder and not the base plate as shown in the pics. Any suggestions?

Manny

 

[n9mxq]

Huh, you're right, the base isn't in the STL file.. That's odd... Taking a closer look at the page, the base is here: Kenwood TH-D7 Wall holder / Table stand / Custom mount by ornotermes Sorry about that.

 

[N1SQB]

Huh, you're right, the base isn't in the STL file.. That's odd... Taking a closer look at the page, the base is here: Kenwood TH-D7 Wall holder / Table stand / Custom mount by ornotermes Sorry about that.

EXCELLENT! Thank you very much. I will pass it on and report back with the finished product.!

Manny

 

[N1SQB]

UPDATE: Finally finished it. Here is the finished product thanks to a good friend with a 3D printer.

Manny

 

[KM4OBL]

Wow, that's beautiful. I use a $4.00 brochure holder from a local office supply store.

 

[N1SQB]

Wow, that's beautiful. I use a $4.00 brochure holder from a local office supply store.

Thanks. The original color of the mold was light gray. Once I made sure everything fit and looked right, I sanded it down and painted it gloss black. You can tell the original color by looking from the back at the center piece that attaches both pieces together. Total cost was about $15 which included the paint and sandpaper ( 220 grit).

Manny