Can I trunk track freqs on DSDPlus scan for freqs for a system or do I need to have sharp for control channel and run dsdplus?
Can you rephrase that.
For best results, with 2 dongles, your setup should be (using TCP):
FMP24 set up as CC
DSDPlus setup as CC
FMP24 set up as VC
DSDPlus setup as VC
CC (Control Channel) setup follows control activity
VC (Voice Channel) setup responds to CC and follows voice activity.
You still need to fill in the record files (.frequencies, .sites, .networks)
Need more details. What system? What setup in the files have you done?
Are you asking about scanning to find frequencies?
No I have the freqs just to need to scan them
Do you really just have a bunch of numbers? And are you really using FMP instead of FMP24?fmp-cc.bat 4 1 20.0 452.625
fmp-vc.bat FMP 3 2 20.0 99.99999999
P25 systems don't need any user-provided channel data.Freq section
; Regional Domestic Security Task Force
P25, BEE00.292, 1.14, 0, 769.25625, 799.25625, 0
P25, BEE00.292 1.14, 0, 770.28125, 800.28125, 0
P25, BEE00.292, 1.14, 0, 771.38125, 801.38125, 0
Entering channels twice doesn't accomplish anything.; PowerSouth Energy Cooperative
Con+, 164, 18, 0, 451.0625, 456.0625 0
Con+, 164, 2, 0, 461.6000, 466.6000 0
Con+, 164, 11, 0, 452.6250, 457.6250, 0
Con+, 164, 11, 0, 452.6250, 457.6250, 0
Con+, 164, 11, 0, 451.9250, 456.9250, 0
Con+, 164, 11, 0, 451.9250, 456.9250, 0
Con+, 164, 11, 0, 451.0750, 456.0750, 0
Con+, 164, 11, 0, 451.0750, 456.0750, 0
You haven't set any of the channel numbers. DSD+ can't trunk track if you don't tell it what channel numbers go with what frequencies.Con+, 164, 28, 0, 451.7500, 456.7500, 0
COn+, 164, 28, 0, 452.1000, 457.1000, 0
Con+, 164, 28, 0, 452.7250, 457.7250, 0
Do you really just have a bunch of numbers? And are you really using FMP instead of FMP24?
Entering channels twice doesn't accomplish anything.
You haven't set any of the channel numbers. DSD+ can't trunk track if you don't tell it what channel numbers go with what frequencies.
Then you're mixing parts of DSD+ 1.101 with parts of FL. That's asking for trouble.I haven't ran FMP24 before.
The 1.101 docs (DSDPlus.txt) says one entry per DMR RF channel.I thought it had been twice since there is 2 different slots
The control channel tells you the channel numbers.I don't know the LCN or CH ID number.
Then you're mixing parts of DSD+ 1.101 with parts of FL. That's asking for trouble.
The 1.101 docs (DSDPlus.txt) says one entry per DMR RF channel.
The control channel tells you the channel numbers.
Looks like you have a CC but in that screenshot, there has not been any call activity.
You should see a channel # appear when that happens.
Must be a dead quite network.
Do you have the Fastlane (paid) version of DSDPlus or only the public released version (v1p101)?
As noted, because there's no traffic. So you're not missing anything...The Control Channel for the Power Company doesn't give out the Channel Numbers for some odd reason.
As noted, because there's no traffic. So you're not missing anything...
The screenshot shows FMP that's not the Fastlane version FMP24.
You need to be using FMP24 if you have the Fastlane version.
Also check version of DSDplus your pointing to. Check your .bat files.
Versions are displayed at startup in console or event window.