• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

Federal Signal Vision Lightbar Controller Question

Status
Not open for further replies.

ChevyGuyScott

Newbie
Joined
Oct 14, 2010
Messages
0
Does anyone know if theres a way to just use the controller as a switchbox / controller for other lights and such without having the gigantic V-bar mounted on the roof?

because I basically i just wanna use it for the Traffic advisor bar and the slide switch to control my other lights in sync, strobes, dash, grill lights etc.

Thanks
 

fineshot1

Member
Joined
Sep 17, 2004
Messages
2,478
Location
NJ USA (Republic of NJ)
I don't see why you could not do what you are asking.

I have done this with other light bar controllers and took out the
higher amp fuses and put in lower amp fuses for the lower current
consuming devices on the output ports to make it safer.
 

ChevyGuyScott

Newbie
Joined
Oct 14, 2010
Messages
0
well the reason I was asking is because someone told me that if the controller sensed a light was not connected or something it would cause an error and not work at all, and I don't even want the V-Bar hooked up. just want the TA bar and strobes and front and back lights grill etc.
 
Status
Not open for further replies.
Top