• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Gp2000

Status
Not open for further replies.
T

Torun

Member
Joined
Mar 13, 2008
Messages
2
Hello guys

I have a problem with GP2000.I program it so that PTT ID should be sent when pressed ,but only voice signal is recieved and ID isn't displayed on the radio screen. PTT ID is enabled on the channel and as voice signal is heared I assume it's transmited,but why isn't it displayed ...

would appreciate if anyone could help with it :)
 
T

Torun

Member
Joined
Mar 13, 2008
Messages
2
No exactly PTT ID.

It has... problem is I don't have full manual.... from what I've learned from my manual, I've set PTT ID (8 digit code) in RW meniu, then enabled it on the channel.. there is also an option to send ID upon pressing PTT,after or in both times... I tried all this cases and indeed voice signal is heard according to this option... but only thing I see on the screen is CH 001 ,code doesn't display :/ ...........

strange thing is with Selective call too... AFAIK if you want to send SC you need to push PTT and deal number .I've enabled SC ,but when I press PTT and try to deal number ,nothing displays - again just CH X .

I might think that this is due of my radio station ,but as both radios have this problem I guess is less likely ..............
 
Status
Not open for further replies.

Similar threads

G
no Duplex operation repeater HYTERA RD625 accessory connector
Replies
1
Views
272
speedway_navigator
S
A
MCS2000 Repeater Project Help
Replies
0
Views
199
atlas_tk11
A
kb1ejw
NX-5800 mic question
Replies
2
Views
199
kb1ejw
kb1ejw
Tim
P-25 Control Channel on 408.0000 in Des Moines Area
Replies
10
Views
707
Tim
Tim
I
Minitor VI Issue/Question
Replies
9
Views
550
ImRyan
I
Top