KB7MIB
Member
I was wondering if anyone has found the optimum settings for a GRE PSR-500, for monitoring the RWC & TOPAZ RWC?
I program by hand, as I don't have a useable computer, so if you can translate software settings to manual settings, it'd be appreciated.
I also need to update the firmware for my '500. I haven't done so since I bought it. But, again, I don't own a computer with which to do this.
One thing I have noticed is, my reception of Simulcast G is better when I first turn the scanner on, then degrades, apparantly as it warms up?
I've also noticed, that when searching through the 700 MHz band, that conventional reception of the RWC seems slightly better when tuned slightly off frequency, to the high side. For example, 769.121875 is slightly better than the actual frequency of 769.121250. I'm not sure why this would be, but I have the NARROW FM setting set to NO under the expert settings for the scanlists that hold RWC systems.
I use the 800 MHz duckie from RS as my primary antenna.
John
Peoria
I program by hand, as I don't have a useable computer, so if you can translate software settings to manual settings, it'd be appreciated.
I also need to update the firmware for my '500. I haven't done so since I bought it. But, again, I don't own a computer with which to do this.
One thing I have noticed is, my reception of Simulcast G is better when I first turn the scanner on, then degrades, apparantly as it warms up?
I've also noticed, that when searching through the 700 MHz band, that conventional reception of the RWC seems slightly better when tuned slightly off frequency, to the high side. For example, 769.121875 is slightly better than the actual frequency of 769.121250. I'm not sure why this would be, but I have the NARROW FM setting set to NO under the expert settings for the scanlists that hold RWC systems.
I use the 800 MHz duckie from RS as my primary antenna.
John
Peoria