Harris P25 to ZumSpot to an area Brandmeister DMR TG

[bcfd346]

I have a Harris Unity xg-100p with P25 and a ZumSpot. I need to talk to a Brandmeister DMR Talkgroup used for a local ARES group. What do I need to do to link the P25 portion of the ZumSpot to the DMR Talkgroup?

Thanks,
Jeffrey LeMaster
KJ4NEE

 

[n9mxq]

According to what I can find on forum.pistar.uk - Index page DMR2P25 is not yet supported.

 

[bcfd346]

Not directly. But if I can link a pistar to a reflector, then I should. I do not have a physical repeater. I need a inexpensive solution to a bridge. Something plug and play.

 

[n9mxq]

I would ask over on the Pistar forums. The knowledge base there will probably get you an answer quicker than here.

 

[KI4IHC]

I actually just built a P25 / DMR bridge using this guide - Build a P25/DMR Cross-Mode Bridge | 927.ORG

I used a Debian 10 VM because it made the most sense for me, but the instructions will work on a Pi as well.
No idea if it'll run happily on the Pi hosting your zumspot, though.