• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

HT1250 no sound

Status
Not open for further replies.

tozzi58

Member
Joined
Mar 16, 2012
Messages
1
This may be stupid but i recently had my 1250 programmed for use at work, all of the channels in the zones work except for one of them. 153.62000 is the frequency for this channel 431 DPL, i tried to use it this morning at work and was able to transmit and my dispatch, and they could hear me loud and clear, but if i have the radio on scan i can't receive any transmissions for that channel . If i take it off of scan then the screen is showing that I'm receiving the transmission but i cant hear anything coming through. any ideas? your input is appreciated.
 
Joined
Jun 5, 2004
Messages
208
Location
Arizona
sounds like something changed on that system. Maybe they changed the RX DPL. Do you have any of your buttons programmed to "monitor". Try taking of the RX tone and see if you can hear again.
 

andylene

Member
Joined
May 10, 2007
Messages
4
Don't the older 1250's have a problem with sound chip. I saw a video on youtube about replacing it
 
Status
Not open for further replies.
Top