• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Icom f14

Status
Not open for further replies.

slingshot202

Member
Feed Provider
Joined
Sep 10, 2008
Messages
662
Location
New Jersey
Anyone familiar with programming the F14? I have the VHF version and I can program, connect, etc, however the green light always stays on and when I click the Monitor button or have a channel without a PL I continually receive carrier squelch (static).

Thanks.
 

WayneH

Forums Veteran
Super Moderator
Joined
Dec 16, 2000
Messages
7,521
Location
Your master site
Thread moved. The F14 is not a receiver. Please use the ICOM forum in Commercial & Professional next time. Thanks.
 

SCPD

QRT
Joined
Feb 24, 2001
Messages
0
Location
Virginia
Anyone familiar with programming the F14? I have the VHF version and I can program, connect, etc, however the green light always stays on and when I click the Monitor button or have a channel without a PL I continually receive carrier squelch (static).

Thanks.

You will get white noise when you do not use a pl tone or press the monitor button if you are around different kinds of electronics that give off RF emissions
 

kb0jfg

Member
Premium Subscriber
Joined
Aug 4, 2010
Messages
3
Location
Kansas
Green light

There is a setting in the software for the squelch threshhold under I think common setting in the directory tree. Set 130-160 should work
 
Status
Not open for further replies.
Top