Longwood Security

[djs9164]

I am trying to find the proper frequencies for Longwood Security for Boston. I did a search on SNE and came up with 483.8125, is this correct? If so how can I program it on a Whistler 1088. TIA

 

[piercescan]

I am trying to find the proper frequencies for Longwood Security for Boston. I did a search on SNE and came up with 483.8125, is this correct? If so how can I program it on a Whistler 1088. TIA

Heres a manual link: Easier to Read Whistler WS1080/1088 Handheld Scanner and Software Manual

 

[djs9164]

I have that manual, thanks, Let me clarify. I need to know it's the correct frequency and if its DMR/NXDN/P25 conventional or trunked. And then how I should enter that info into my scanner. When I programed it analog I got digital noise.

 

[EastCoastSunrise]

I have that manual, thanks, Let me clarify. I need to know it's the correct frequency and if its DMR/NXDN/P25 conventional or trunked. And then how I should enter that info into my scanner. When I programed it analog I got digital noise.

After doing a little detective work I think it is DMR with a code/tone of C01. I would reference your manual for how to program non trunked DMR and I think that should work. Good luck! I also found this thread on RR that I think has some more useful information for you. 483.4875 Comtronics ???????

- East

 

[djs9164]

I tried conventional DMR- No traffic. Tried it as a DMR trunk and got a few hits. Any suggestions welcome. I am trying to monitor a patrolled site thats only 1000 ft away.

 

[lebrunmn]

I am trying to find the proper frequencies for Longwood Security for Boston.

Check the FCC license search for Longwood Security Services:

ULS License - Industrial/Business Pool, Conventional License - WQBG256 - LONGWOOD SECURITY SERVICES INC - Frequencies Summary

if the Link doesn't work, here's a screencap of the freq tab for them:

Hope that helps.

 

[djs9164]

Thanks but I think that is obsolete information. If you check on the main tab you will see it says expired. The frequency I have is correct, just trying to figure out how best to add it to my Whistler.

 

[EastCoastSunrise]

I am a Uniden user so excuse me if I am wrong about this, but did you make sure your firmware up to date and you have the DMR update installed. Looking at the manual it seems that you may need an update so that you can receive DMR.

 

[EastCoastSunrise]

BearCom 900 DMR trunk - Scan New England Wiki

www.snewiki.com

That is a link to the Scan New England Wiki, they have a little bit more detailed information on the system. So I would recommend reading that page and the manual for your scanner and see what you need to do to program in order to receive it properly.

 

[ecps92]

Longwood Security or the "Longwood Medical Area" ??

I am trying to find the proper frequencies for Longwood Security for Boston. I did a search on SNE and came up with 483.8125, is this correct? If so how can I program it on a Whistler 1088. TIA

 

[EastCoastSunrise]

Whoops, I posted the wrong link to Scan New England. Business Radio Systems - Scan New England Wiki Is the correct link.