• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Look-up Frequency by FCC Equipment Authorization #?

Status
Not open for further replies.

BlueMoon2

Member
Premium Subscriber
Joined
Dec 26, 2008
Messages
470
Location
Midlothian, VA
Hello,

I'm trying to figure something out here. I live in an apartment complex that uses Motorola MagOne BPR40 handheld radios. I'm trying to figure out what frequency or frequencies they are using. I talked to the apartment maintenance manager and he doesn't know what frequency they're on but he took off the back cover of the radio. The FCC ID is: AZ489FT98373 or it could be AZ489FT48373. He says that he took it to Clear Communications here in Charlottesville, VA to have it programmed. I know the company he is talking about, but they don't seem to be very pleasant to deal with. Can someone help me figure out what frequency they might be on? I've already looked up in the FCC license database to see if they have a license and I could not find one under Mallside Forest Apartments, Fore Properties or Woods Edge Apartments. Short of calling Clear Communications, or trying to track them down on my scanner, is there anything else I can do?

Thank you
 

cabletech

Member
Joined
Apr 22, 2012
Messages
871
Location
Puget Sound
Unfornately, their is no one going to be able to help find the exect frequency.

Does your scanner have close call? Go stand next to one of the people and have them key up, your scanner will lock on.

Other wise, put your scanner in searce mode and then just wait.
 

N4KVE

Member
Joined
Mar 1, 2003
Messages
4,321
Location
PALM BEACH, FLORIDA
Unfornately, their is no one going to be able to help find the exect frequency.

Does your scanner have close call? Go stand next to one of the people and have them key up, your scanner will lock on.

Other wise, put your scanner in searce mode and then just wait.
This is what my Dad did to find out the freq security was using in his building.
 

Jimru

Member
Premium Subscriber
Joined
Dec 19, 2002
Messages
1,314
Location
Henrico County, VA
The advice to punch in the MURS frequencies is a good one.

While your at it, do as I and others have done; plug in all of the "Dot" and "Star" frequencies, as well as FRS/GMRS frequencies and you will probably find your building, but if not, you will hear a lot of interesting stuff in your area!

I agree that if your scanner has a "Close Call", or similar near field frequency grabbing feature, use that first. If not, you will have to use one of the most powerful features any scanner ever had: the search feature! It takes time and patience, but you will find what you are looking for.
 

cmdrwill

Member
Joined
Mar 30, 2005
Messages
3,984
Location
So Cali
" already looked up in the FCC license database to see if they have a license and I could not find one under Mallside Forest Apartments, Fore Properties or Woods Edge Apartments."

I'd bet they do not have a valid FCC License. Even the 'Dot frequencies' require a license.

Also check GMRS and FRS, a lot of so-call Motorola shops program radios on those frequencies, and other frequencies, that the user is not licensed for.........
 

KG4INW

Member
Premium Subscriber
Joined
Apr 9, 2009
Messages
1,603
Location
Midlothian, VA
All an FCC ID search will yield is what band the radio's on. Much easier to determine that if you can see what the specific model number is, which will be on the the same label as the FCC ID anyway.
 
Status
Not open for further replies.
Top