• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

Manatee County East/West

Status
Not open for further replies.

TheRover

Member
Joined
Mar 11, 2010
Messages
29
Location
Chicagoland
Looking for a little help. Trying to track the system with a 346XT, Im wondering if the RR lcn is not updated ? I have double and triple checked the frequencys/ lcn , im not getting the cc and the radio shows 5 bars of signal when it scans over the cc. When I stop on a channel thats active, I hear the beeps at the end.I was led to believe it will not track the edacs if the lcn is out of order , and hearing the beeps indicates they are out of order ? The radio is hearing other county edacs systems perfectly. Any tips would be greatly appreciated.
 
Last edited:

6Paul21

Member
Premium Subscriber
Joined
Jul 2, 2002
Messages
394
Location
Florida
RR Data base is correct for West side which is primary. Today 1/21 they are using LCN 03-854.3375 as control channel. Make sure you leave 00 empty. Hope this helps.
Ed
 

TheRover

Member
Joined
Mar 11, 2010
Messages
29
Location
Chicagoland
Changed site type from Narrow to Wide(standard) setting and its recieving nicely. Also found out I was in a dead spot. Thanks Ed !
 
Status
Not open for further replies.
Top