• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

Mobile County/City And Area Fire

Status
Not open for further replies.
Joined
Aug 30, 2018
Messages
3
Location
Mobile ,Alabama
#1
I have a BCD436Hp and I want to hear Mobile County/City And Area Fire on my scanner but I have no problem hearing them on my cell phone with Broadcastify
I have everything on favorites list and I have right service types turned on

so I do I correct this to listen to them on my scanner
help please
 

MFRD8539

Member
Premium Subscriber
Joined
Dec 19, 2002
Messages
37
Location
Mobile AL
#2
You’re question could probably be answered, but you’ll need to provide some of the settings you have programmed. Broadcastify is streaming a radio that already has the correct programming, so that doesn’t help you.
 
Joined
Aug 30, 2018
Messages
3
Location
Mobile ,Alabama
#3
Mobile County/City And area Fire

I have all the service types turned on in scanner and location for mobile alabama and I have my data base in scanner updated and still not hearing mobile county and area fire on my BCD436HP
all help would be greatful thank you in advance
 
Last edited:

garys

Member
Premium Subscriber
Joined
Jun 13, 2002
Messages
4,460
Location
Eastern MA
#4
Try turning off the location settings.

I have all the service types turned on in scanner and location for mobile alabama and I have my data base in scanner updated and still not hearing mobile county and area fire on my BCD436HP
all help would be greatful thank you in advance
 
Joined
Apr 9, 2018
Messages
5
Location
Satsuma, Alabama
#6
I have a home patrol 2 and have not been able to pick-up the fire or as it goes not much of anything. I live in a fringe area but sure we not go to the problem of putting up an outdoor antenna for nothing,
 
Status
Not open for further replies.
Top