Multiple SDRs on one Raspberry Pi 4

[SurgePGH]

I am running TWO Raspberry Pis. One is running ADSB Exchange software with an ADSB Exchange SDR dongle. The second is running an SDR dongle with an image for SondeHub to report for weather balloons. I know very little to nothing about the operating system. I am attempting to run BOTH SDRs off of one Pi with each SDRs program running at the same time.

Is this possible?
How would I go about this?

Thanks,
Dave

 

[dickie757]

Same OS on the separate Pis? Or a dedicated image to run ADSB and Sondehub?
I would get both programs installed/loaded, try to run each prog.

Try to find directions to load and run each prog on Linux. You might have to burn a new OS to run them

 

[SurgePGH]

Same OS on the separate Pis? Or a dedicated image to run ADSB and Sondehub?
I would get both programs installed/loaded, try to run each prog.

Try to find directions to load and run each prog on Linux. You might have to burn a new OS to run them

They come with predefined dedicated images. You dump the image to a Micro SD card and then insert it into the Pi. Beyond that I am lost.

 

[dickie757]

Ok. Look around the web for intructions to install any of the progs you use on a Linux OS. They dont have to mean anything to you, just see if you can find them. Post links here.

Might be a different program than you arw used to, but will do the same thing.