W0JJK
Member
- Joined
- Jan 25, 2006
- Messages
- 618
It is now approved with a callsign.
Nebraska (Statewide) Wireless Interoperable Network "N-WIN"
- Thread starter Thunderbolt
- Start date
-
- Tags
- state beach sticky
IrvingtonVFD43
Member
This is likely the new tower going up to patch a hole in coverage for the Fire Departments coming over to the SRS. There was discussion about it at the Madison BOC meeting Tuesday.
IrvingtonVFD43
Member
They are going to be rather disappointed in the coverage of 800mhz in that part of the county. Very hilly. Unless this is going to be a very tall tower with hi gain antennas and tower top amplifiers. I still ask myself the same question why Norfolk proper needs 800.
IrvingtonVFD43
Member
I will add this to the monitor list. It may be a tough go up here in Norfolk since its 800mhz and 20 miles southwest of me. Perhaps a road trip towards the tower may be in the works once it is turned up.
W0JJK
Member
- Joined
- Jan 25, 2006
- Messages
- 618
I found another 800 trunked license for the state in Norfolk.
It is at the Norfolk Regional Center.
It is at the Norfolk Regional Center.
IrvingtonVFD43
Member
Looking through the license and the emission designation, looks like this is going to be a NEXEDGE (NXDN) system. I haven't made the jump to a SDS 100 or equivalent...yet....(still have a Pro 106)......
IrvingtonVFD43
Member
Newman Grove site has finally been turned up as of this morning. Madison Rescue and Tilden Rescue were affiliating to the Norfolk West 800 site.
I can hear it on my Pro106, decent reception, but strangely, I cannot hear it on my TRX 2 on a Omni X. up in the attic.
Talkgroups will be posted on another thread as I start seeing them and getting them identified.
Here are the details from Pro96com
FileVersion:8
-TowerInfo
#This section is here for information only. With the exception
#of the Call Sign(s), This data is not Read back into the program at all.
System ID : B8F
System Name : Madison County/Nebraska SRS
WACN : BEE00
Tower Number (Decimal): 1-19
Tower Number (Hex) : T0113
Tower Description : Newman Grove
Control Capabilities : Data,Voice,Registration
Flavor : Phase 2
Call Sign(s) : WRXJ 336
Timestamp : Mon Feb 5 18:48:22 2024
-Tables
#Format: Table ID,Base Freq,Spacing,Input Offset,Assumed/Confirmed,BandWidth,Slots
00,851.00625,0.00625,-45.00000,"Confirmed",0.01250,1
01,762.00625,0.00625,30.00000,"Confirmed",0.01250,1
02,851.01250,0.01250,-45.00000,"Confirmed",0.01250,2
03,762.00625,0.01250,30.00000,"Confirmed",0.01250,2
05,149.00000,0.00250,0.00000,"Confirmed",0.01250,1
06,161.00000,0.01250,0.00000,"Confirmed",0.01250,1
07,158.00000,0.00250,0.00000,"Confirmed",0.01250,1
-Frequencies
#Format: Channel,Usage,Frequency(/Slot),Input Channel,Input Frequency(/Slot),Input Explicit(1/0),Hit Count
"00-0419","a",853.62500,"00-0419",808.62500,0,0
"00-0459","c",853.87500,"00-0459",808.87500,0,0
-Neighbors
#Format: TowerID,TowerIDHex,System ID,Channel,Frequency,Tower Name
163,"T013F",b8f,"05-2602",155.50500,"Elgin"
166,"T0142",b8f,"05-2635",155.58750,"Norfolk VHF East"
173,"T0149",b8f,"05-2650",155.62500,"Osceola"
174,"T014A",b8f,"05-2764",155.91000,"Humphrey"
192,"T015C",b8f,"05-2629",155.57250,"Albion"
195,"T015F",b8f,"00-0553",854.46250,"Norfolk 800 West"
Last edited:
Has the statewide system switched to Phase 2? I can still monitor it with my SDS200, however I'm trying to program a friend's Whistler WS1065 and I'm not receiving anything, but it is a Phase 1 only scanner. Curious if I'm missing something during programming or if everything is Phase 2 now?
IrvingtonVFD43
Member
At this time the SRS is not Phase 2.
Thanks. I was kind of hoping it was...that would explain why I can't get this scanner to program. I guess I'll keep trying.
