• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

NEW Pro-2096 What CPU?

Status
Not open for further replies.

RadioMarkW

Member
Joined
Jul 31, 2005
Messages
139
Location
Illinois
What should the new pro-2096 read for cpu and firmware numbers?

It says in the wiki that the latest cpu should be 1.4 but then says the sreen will read

CPU: F1.1 DSP-APP: F1.2 DSP-VOC: F1.0. Is this correct?!?!?

Mine reads CPU: F1.2 DSP-APP:F1.2 DSP-VOC:F-1.0

When it boots up it states :

DSP LOADING
BOOT: F1.0

Is this correct or do I have an older CPU?

I want to make sure I have the latest version of everything!

Thanks,

Mark
 
Last edited:

Talldog9

Member
Joined
Jun 6, 2006
Messages
11
Location
Newport, KY
the latest versions are

CPU F1.4
DSP VOC F1.0

DSP LOADING
BOOT: F1.0

the CPU can also be 1.3 with no differences from 1.4
Latest DSP APP is 1.3
 

scanjunkie

Member
Premium Subscriber
Joined
Jan 8, 2003
Messages
1,355
Location
Montgomery County, PA
Talldog9 said:
the latest versions are

CPU F1.4
DSP VOC F1.0

DSP LOADING
BOOT: F1.0

the CPU can also be 1.3 with no differences from 1.4
Latest DSP APP is 1.3
You have the latest...The statement above pertains to the PRO-96...not the 2096. The 2096 came out after the 96, so by the time all of the bugs were worked out of the 96, the 2096 was born and the first CPU they put in it was version 1.1 = to the 96's 1.3/1.4.
Your DSP-App of 1.2 can be upgraded with the latest 1.3 though.
 

Talldog9

Member
Joined
Jun 6, 2006
Messages
11
Location
Newport, KY
Talldog9 said:
the latest versions are

CPU F1.4
DSP VOC F1.0

DSP LOADING
BOOT: F1.0

the CPU can also be 1.3 with no differences from 1.4
Latest DSP APP is 1.3

Sorry about that. got confused.
 
Status
Not open for further replies.
Top