• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

New website hosting DMR codeplugs

Status
Not open for further replies.
Joined
Aug 27, 2013
Messages
3
Location
Green Cove Springs, FL
#1
I have created a website in the hopes to get and host codeplugs for every State in the US. I'll need your help as a community to be the most helpful to the Amateur Radio operators. I have a basic site up and running and have a few codeplugs that I have found. It is certainly a work in progress. If you'd like to help with the project, then please email me either codeplugs or links to codeplugs. I'll, promptly, get them up on the site.

Thanks everyone for your time,

Joseph Rowe (Jowe) - WJ0WE
WJ0WE@Yahoo.com
 

vrc_tech

LRGV Radio Tech.
Database Admin
Joined
Aug 8, 2001
Messages
54
Location
Harlingen, TX
#4
DMR codeplug website.

Howdy! Joseph,:)
Your website sounds like a good Idea, but you failed to mention the address of the site.

I have created a website in the hopes to get and host codeplugs for every State in the US. I'll need your help as a community to be the most helpful to the Amateur Radio operators. I have a basic site up and running and have a few codeplugs that I have found. It is certainly a work in progress. If you'd like to help with the project, then please email me either codeplugs or links to codeplugs. I'll, promptly, get them up on the site.

Thanks everyone for your time,

Joseph Rowe (Jowe) - WJ0WE
WJ0WE@Yahoo.com
 

fxdscon

Member
Premium Subscriber
Joined
Jan 15, 2007
Messages
3,847
#5
Howdy! Joseph,:)
Your website sounds like a good Idea, but you failed to mention the address of the site.
He gave a link to it in post #3 just above your post, but clicking on the link comes back as "Site Unavailable".

The link goes to:
Code:
http://www.us-dmr.info/
.
 

Kirk

DB Admin
Moderator
Joined
Dec 19, 2002
Messages
778
#7
It's got a 451 error, which is "website blocked for legal reasons." That's not good.
 

vrc_tech

LRGV Radio Tech.
Database Admin
Joined
Aug 8, 2001
Messages
54
Location
Harlingen, TX
#8
Codeplugs

Hey! Michael,
Send me your code plugs and I will put them on the South Texas Amateur Repeater Society site. I am already building a DMR Page for the site. I should have the Harlingen DMR site back up shortly, as soon as I get the new MMDVM v1.2 board. New MMDVM boards should be out mid November.
73's N5SLI

Sound like a good idea i have some codeplugs to share,but where is the link to your website the one in post #3 dont work.......
 

N9PBD

Member
Premium Subscriber
Joined
Aug 24, 2003
Messages
489
Location
Southern Illinois (Metro St. Louis)
#9
I also get the 451 error:

Site temporarily unavailable (451 error)
This site is currently unavailable

If you are the owner of this site, please contact us at 1-480-624-2500 at your earliest convenience.
 
Status
Not open for further replies.
Top