NX 300 priority scan NXDN while on conventional channel

[vonchampz]

Here is what I'm trying to do for a customer with an NX300 radio....

We have a NXDN network that is up and running. The customer will have 1 ID/channel and will use it for emergencies. When not on the NXDN emergency network channel, the radio will be used at different sites talking on conventional channels. What I would like to happen is if someone on the emergency network keys up, the NX300 will switch to that NXDN channel even if the radio is on a conventional channel. Will a priority scan do this? Has anyone done this?

Thanks in advance!

 

[kd4efm]

Priority scan will work, but you or customer will experience breaks in the audio while scanning. But it can be done.

kd4efm Evans, sent using TapTALK on my HTC M9

 

[evfd1625]

If you do this. Set the emergency channel as priority one, and the selected channel as priority 2, this way you can still scan. Otherwise the radio may not scan with no other channels in the list

Sent from my VS990 using Tapatalk

 

[vonchampz]

How do you set a priority 2 channel? I have 1 NXDN Trunking System Zone that is the emergency channel. Then I have a FleetSync Conventional group. I have set the priority scan channel as the NXDN Zone, but how do i set priority 2 scan?