• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Pantech UML295 External Antenna Connector

Status
Not open for further replies.

StickyBit

Regular Listener
Joined
Jul 3, 2010
Messages
29
Location
UT
I have a data modem that will be permanently installed into a vehicle. It is a Pantech UML295 manufactured for Verizon's 4G LTE network. ( https://www.verizonwireless.com/support/4g-lte-usb-modem-uml295/ )

I am having trouble locating reliable information about what type of external antenna connectors this modem has. Some results in Amazon for adapter cables reference it as a "pigtail", others as "TNC", and others as "TS9". I am hoping someone can provide some expert confirmation or analysis as to what type of connectors these are for sure. I've attached an image file of the antenna connectors on the modem. Could you help me properly identify these connectors?

My end goal is to find the adapter to connect it, and some good NMO-HF magnetic or trunk lip mount with cabling with which to connect it to, where I'll have two external Pulse Larsen SLPT698/2170NMOHF antennas.
 

Attachments

  • IMG_2.jpg
    IMG_2.jpg
    190.1 KB · Views: 403

flux4201

Member
Premium Subscriber
Joined
Jan 12, 2010
Messages
89
The adapter i linked in my earlier post converts the modem from its connector to a SMA Female, since you have an antenna with a FME female, they wont mate. You need this adapter linked below to connect the pigtail i linked in the other post to the antenna you purchased.

https://www.amazon.com/DGZZI-2-Pack...ME+male+to+sma+male&psc=1&smid=A23YDYH2AP2C8X


In total, you need the following to connect that antenna you purchased to your pantech modem:

https://www.amazon.com/dp/B00W65XXW4?tag=viglink20662-20

and

https://www.amazon.com/DGZZI-2-Pack...ME+male+to+sma+male&psc=1&smid=A23YDYH2AP2C8X
 

StickyBit

Regular Listener
Joined
Jul 3, 2010
Messages
29
Location
UT
Excellent. I'll buy them and report back. I'd rather get the adapters than lose the money spent on the perfectly good antennas. Thanks for the info.
 

sfd119

Member
Joined
Jul 18, 2009
Messages
1,763
Just a word of advice, I would go with a Cradlepoint modem instead of a USB/Hotspot device. You'll have better connectivity. I've found that even with an external antenna, I would still experience signal issues and rebooting issues with those devices.
 

StickyBit

Regular Listener
Joined
Jul 3, 2010
Messages
29
Location
UT
Thanks for the recommendation - though I'm pretty happy with the setup I have. It's been running flawlessly.
 

StickyBit

Regular Listener
Joined
Jul 3, 2010
Messages
29
Location
UT
Just a word of advice, I would go with a Cradlepoint modem instead of a USB/Hotspot device. You'll have better connectivity. I've found that even with an external antenna, I would still experience signal issues and rebooting issues with those devices.

So you are absolutely right. The firmware on the USB modem locks up frequently and is not reliable. I wasn't seeing it before because it was rebooting regularly as a result of my changes on my network config while I was testing. Once I stopped making changes and hence no longer rebooted my router, I began to see the USB modem locking up in less than 48 hours.

I'll be taking your advice and looking for a different solution. I'm interested in the CradlePoints as well as some particular MikroTik's with their US LTE miniPCIe cards.
 

sfd119

Member
Joined
Jul 18, 2009
Messages
1,763
So you are absolutely right. The firmware on the USB modem locks up frequently and is not reliable. I wasn't seeing it before because it was rebooting regularly as a result of my changes on my network config while I was testing. Once I stopped making changes and hence no longer rebooted my router, I began to see the USB modem locking up in less than 48 hours.

I'll be taking your advice and looking for a different solution. I'm interested in the CradlePoints as well as some particular MikroTik's with their US LTE miniPCIe cards.

Your best bet would be a CradlePoint. Very easy to manage and they are pretty much plug and play. You can find some used ones on eBay for pretty cheap. Just make sure you research the model numbers to know that it'll work with your Carrier of choice.
 
Status
Not open for further replies.
Top