Pasco Trunk

[usafk9dan]

I think pasco added a new cc. I came up with
855.81250
856.83750c
857.83750
858.38750 new cc
858.83750c
859.83750
860.8375
855.22500
856.22500
and it works again.

 

[clawhammer]

I noticed that to today while I was over on the west side of the county today, I thought something had happen to my mobile antenna and checked it out and everything. It was ok and radio was fine. I added that frequency into the bank and I can also confirm that everything is working just fine now.

Allen

 

[Bolt21]

You typically can't just "add" a new freq to an EDACS system. The "new" freq is the previously discussed rebanded replacement for 860.8375. 860.8375 should be deleted and replaced with 858.3875 in the LCN #6 slot. While it might be a cc today, it might be a voice channel tomorrow, and if it's not in the proper channel slot, you'll miss parts of conversations.

 

[mitbr]

Did anyone add it too the main database?
Tim
kg4jjs

 

[Bolt21]

Just did.

 

[mitbr]

thank you Bolt appreciate it.....
73
Tim
kg4jjs

 

[clawhammer]

Sorry, I ment to say in my post also that I replaced 860.8375 with 858.3875 in my radio. my mistake. been up for 17 hours

 

[epicdrome]

As long as you leave the old control channel in you should not have a problem at all

 

[clawhammer]

Got up this morning and notice that there are 2 control ch now. 855.8125 is showing CTL-01 w 97% and 859.8375 is showing CTL-05 sw 99% I do have to say that reception has improved here is Zephyrhills when I use to get only 83-85% on the CTL channel.

 

[tampatracker]

Is there a new freq/lcn lineup?

 

[clawhammer]

So far the Channel line up that I have programed in the radio as of now is working very well, have not missed any transmissions.
LCN1: 855.8125
LCN2: 856.8375
LCN3: 857.8375
LCN4: 858.8375
LCN5: 859.8375
LCN6: 858.3875
LCN7: 855.2250
LCN8: 856.2250

 

[tampatracker]

Thanks, I put that in as well and as of this time have not missed any transmissions either.

 

[6Paul21]

What happened to LCN #4 858.3875?