Path Railroad R3 repeater input frequency?

[wizz5500]

I have noticed the Port Authority of NY&NJ (PATH Railroad) have recently added a VHF repeater to their R3 maintenance channel. Finally hearing both sides of the conversation on my scanner. The repeater output frequency is 161.460mhz. PL-107.2

I already checked the FCC database and unable to locate a license for the input frequency.

Question: Anyone know this input repeater frequency?

 

[spdfile1]

Not to insult your intelligence but if you haven't already I would check that frequency in the whole state of NJ & NY. It may not be limited to a certain county. The license for it might be statewide.

 

[spdfile1]

WQPM463 & WZU433 out of NJ. Nothing out of NY. There's your call signs!!!!

 

[wizz5500]

Must be using an unlicensed repeater input frequency. No success looking through the database.

 

[ecps92]

ULS License - Industrial/Business Pool, Conventional License - WQPM463 - PORT AUTHORITY OF NEW YORK AND NEW JERSEY - Frequencies Summary
Likely it's right there

MO can be Simplex or an input. There really is no 100% science to determining from the FCC license what is the input frequency

Must be using an unlicensed repeater input frequency. No success looking through the database.

 

[wizz5500]

The input frequency for channel R3, 161.460mhz PL-1B is not included in the above FCC database link.

 

[PJH]

Who uses the old 1B, 2A etc names for PL/CTCSS tones?

 

[wizz5500]

Old people.

 

[ecps92]

OK, so you apparently know the frequency, if you can say it is not under WQPM463

Care to share ?

The input frequency for channel R3, 161.460mhz PL-1B is not included in the above FCC database link.

 

[wizz5500]

If I knew the input frequency I would not be inquiring here. The other channels listed are known to me for decades and not being utilized as the input. So I don't apparently know the frequency!

 

[cmdrwill]

Who uses the old 1B, 2A etc names for PL/CTCSS tones?

Old Motorola tech's..........