• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

PRO-2042 Carrier operated Led.

Status
Not open for further replies.

ZB2B

Newbie
Joined
Dec 16, 2013
Messages
1
Location
Gibraltar
Hi guys, I have a Realistic PRO-2042, & I would like to instal a small carrier operated Led light, like the one posted up on youtube.
I can't find the actual modification for it, so I would very much appreciate if anyone could pass me any info, on how to carry out this mod, & the parts required.
many thanks in anticipation.
De, Ron. ZB2B.
 

2manytoyz1

Member
Premium Subscriber
Joined
Jul 26, 2009
Messages
8
Location
Merritt Island, FL
The most original version of this I could find was the posting by Bob Parnass, and it was for the PRO-2004 scanner.

The good news is the 2042 has the same TK10420 chip, so the schematic is no different. The better news is the chip is easier to access on the 2042, than it is on the 2004.

Here's my version of the mod:

http://2manytoyz.com/COL.html

If you need any help, give me a shout.

Robert
 
Status
Not open for further replies.
Top