Pro97 and EDACS narrowband.

[Doppler4000]

Can this scanner monitor an analog EDACS narrowband trunked system on 470 Mhz frequencies?

 

[loumaag]

I would be interested to know if any of the newer GRE scanners can do EDACS Narrow. I know the 96/2096 (or any previous) cannot.

 

[cristisphoto]

I own the 97 and i =t bearly does 800 Edacs ..
Hence I have MUCH better luck tracKing Edacs on my BCD396T

You can download the PDF manual for the Pro97 on the Radioshacsk's web site...
Regards,
Crista

 

[DaveIN]

No, the PRO-97/2055 will not do narrowband EDACS.

 

[jeffrey420]

I own the 97 and i =t bearly does 800 Edacs ..
Hence I have MUCH better luck tracKing Edacs on my BCD396T

You can download the PDF manual for the Pro97 on the Radioshacsk's web site...
Regards,
Crista

I have a 97 and it tracks 800mhz edacs with no problems.

 

[Doppler4000]

The negative answer must be right. I can track regular EDACS systems on 800 mhz with no problems on my pro97, but when I tune to the narrowband control channel on 470 mhz it doesn't even know what to do with that data.... it just plays the noise and interprets nothing.

 

[DaveIN]

Most EDACS public safety systems are EDACS 9600 baud wideband.

http://wiki.radioreference.com/index.php/EDACS

 

[cristisphoto]

Im just speaking from experience
OF course to I live in a VERY HIGH RF area:lol:
SO that could be it too
But yeah I use my BCD396T for my trunking
and my 97 for analog Convetional
Anyways
Relax everyone!
take a chill ya know LOL

Warm regards
Crista

 

[rdale]

Crista - the thread here is about Pro97 and EDACS Narrowband. The scanner does not receive narrowband EDACS, so that's really all the discussion needed here...

 

[loumaag]

Okay, question asked and answered. I am closing this before this goes south.