• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Programming Prince George Co freqs

Status
Not open for further replies.

mcpo2000

Member
Premium Subscriber
Joined
Jan 22, 2004
Messages
5
Has anyone programmed the G5 with the Prince George County fire dept freqs and TG?
 

mikewazowski

Forums Manager/Global DB Admin
Staff member
Forums Manager
Joined
Jun 26, 2001
Messages
13,457
Location
Oot and Aboot
Prince George County where???

If you're going to ask a location specific question in a manufacturer's support forum, you're going to have to provide more information.
 

ka3jjz

Wiki Admin Emeritus
Joined
Jul 22, 2002
Messages
25,361
Location
Bowie, Md.
Careful here- that's Prince George's (possessive) Maryland, apart from Prince George (Virginia)...Mike
 

cpetraglia

Member
Joined
Mar 14, 2003
Messages
868
Location
Fairfax, VA
Has anyone programmed the G5 with the Prince George County fire dept freqs and TG?
All your going to get for now is FD dispatch. The rest is using Phase II. You will occasionally get a Phase I transmission. The G4/5 pagers are not as of yet Phase II. When programming you'll see two separate systems (Simulcast) north and south. Since I am in Fairfax I used the south system and I get a good signal. Using monitor mode to discover what TGs are still Phase I, I did not find any. Only FD dispatch.
 
Status
Not open for further replies.
Top