• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

Programming

Status
Not open for further replies.

joeyv4017

Member
Joined
Jul 2, 2008
Messages
3
i had a portable radio programmed for EMS use and i forgot to use the input frequencies for the repeaters. will i still be able to hear the operations going on over my portable. or am i going to have to get it reprogrammed
 

ka3jjz

Wiki Admin Emeritus
Joined
Jul 22, 2002
Messages
21,781
Location
Bowie, Md.
This message is unclear; if you are talking about a professional radio (Motorola for example) we have a set of different forums for that. If you're talking about a scanner, you generally won't need to hear the inputs of a repeater; that also applies (sometimes) to fireground operations. I said 'sometimes' because on some trunk systems, fireground ops are repeated there.

best regards..Mike
 
Status
Not open for further replies.
Top