• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

PSR-500/Pro96com

Status
Not open for further replies.

squelchtale

Member
Joined
Jan 27, 2003
Messages
16
Does Pro96 com work with the PSR-500 to decode P-25 data channel. I cannot get it to work and I know I have other settings correct as can watch the data dump to a teminal prg and I use Win500 for programming with no problem so I know the data is getting o the computer Any ideas.
 

mikey60

Member
Premium Subscriber
Joined
Sep 15, 2003
Messages
3,512
Location
Oakland County Michigan
squelchtale said:
Does Pro96 com work with the PSR-500 to decode P-25 data channel. I cannot get it to work and I know I have other settings correct as can watch the data dump to a teminal prg and I use Win500 for programming with no problem so I know the data is getting o the computer Any ideas.
Yes it will. Be sure to set the decode radio type in the Pro96Com configuration setting.

Also, I recommend that you put the radio in Analyze mode on the control channel you want to monitor, and not use the program while scanning normally.

Mike
 

tglendye

Member
Premium Subscriber
Joined
Jun 15, 2002
Messages
1,669
Location
Virginia
I haven't been able to find the pro96com link for the software. Can you give me a link? Thanks!
 
Status
Not open for further replies.
Top