• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

Relm MS-200 Scanner

Status
Not open for further replies.

gewecke

Completely Banned for the Greater Good
Banned
Joined
Jan 29, 2006
Messages
7,440
Location
Illinois
#2
I don't think there was any software offered for the 200. You should probably be able to program it by hand. 73, n9zas
 

RTV1130

Member
Premium Subscriber
Joined
Dec 19, 2002
Messages
26
Location
rtv1130
#4
Relm MS-200

To geweke ; Yes there was software for MS-200. I have but it is outdated. I have been rearranging my freqs by and but it's a chore. Thanks.
To N9PBD: OK. Thanks.
 

gewecke

Completely Banned for the Greater Good
Banned
Joined
Jan 29, 2006
Messages
7,440
Location
Illinois
#5
To geweke ; Yes there was software for MS-200. I have but it is outdated. I have been rearranging my freqs by and but it's a chore. Thanks.
To N9PBD: OK. Thanks.
Ok, I programmed one of those several years ago by hand. I didn't know it was even available for that one. Silly me! :). 73, n9zas
 

RadioChief55

Member
Premium Subscriber
Joined
Dec 1, 2006
Messages
319
#6
I'm trying to program a RELM SC200 too, I downloaded the RESRP16 program off the RELM service site. But it doesn't work. I even tried it with an old laptop running Windows XP and it shows 3 available comports but none of them work. Any aftermarket software?
 
Joined
Nov 4, 2009
Messages
24
Location
Rabun County, Georgia
#7
I have the Relm software on a floppy from many moons ago. The Relm MS200 is one of the best scanners I own. Still works flawlessly to this day. It was a big deal in the day when it would do alpha and support PL/DPL tones. I run it on XP but rarely.
 

cbehr91

Member
Premium Subscriber
Joined
Jun 22, 2010
Messages
272
#8
The handheld version, the HS200, was a magnificent scanner in its own right. It didn't do trunking but it was a really hot receiver IIRC and could go down as low as CB receive. Also scan speed was lightning quick. Might have been 100 channel per second.
 
Status
Not open for further replies.
Top