Seminole County/Donalsonville

Status
Not open for further replies.

Shadow357x2

Member
Joined
Sep 26, 2020
Messages
7
Is anyone Successfully monitoring SCSO and Donalsonville?
The info for these 2 areas that is posted in the DB doesn't seen to jive with whats going on.
Currently running an SDS200 with the dl direct from the db and no go.
I do get hits with butel when monitoring but zero voice at all. Signal strength is at 113db so thats not really an issue, the tower is 8 miles away and even within 2 miles of it still the same story.
 

N8IAA

Member
Joined
Dec 19, 2002
Messages
7,243
Location
Fortunately, GA
Unless you have NXDN activated on your scanner, you will not hear anything.

You may want to put in the conventional frequencies to see what you might hear.
Just a suggestion.
 
  • Haha
Reactions: RRR

Shadow357x2

Member
Joined
Sep 26, 2020
Messages
7
Unless you have NXDN activated on your scanner, you will not hear anything.
I see that with the Headland tower being NXDN now. there goes another 75.00 Attached Nxdn shot for what appears to be Donalsonville,Ga.


You may want to put in the conventional frequencies to see what you might hear.
Just a suggestion.

SCSO appears to be a standard p25 system and Arc has managed to pull 1 more freq in the 800 mhz band for scso. I have also attached the arc log and the shot from the db here on RR for them.
Maybe I'm just an idiot but would definitely like to figure that out
 

Attachments

  • nxdn.JPG
    nxdn.JPG
    69.7 KB · Views: 19
  • log.JPG
    log.JPG
    103.4 KB · Views: 18
  • scso.JPG
    scso.JPG
    26.6 KB · Views: 20
  • Like
Reactions: RRR
Status
Not open for further replies.
Top