• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

Shuttle Launch

Status
Not open for further replies.

nosoup4u

Member
Premium Subscriber
Joined
Jan 30, 2002
Messages
1,884
Location
High Bridge, NJ
I have patched the shuttle feed from IRLP reflector 9356 into the Penn-Jersey ARC UHF repeater located in Warren County. If you are within listening distance, tune your radio to 443.850, PL 110.9.
 

rcvmo

Member
Joined
Aug 11, 2004
Messages
433
Location
Romulus, Mi.
In the Detroit area, the launch will be broadcast over ATV 439.650 MHz w/ voice ( channel 60 on your tv, set it for cable tv, disconnect cable server and connect an external antenna and watch). Best bets to view are from the Downriver area.
RCVMO
 

fineshot1

Member
Joined
Sep 17, 2004
Messages
2,478
Location
NJ USA (Republic of NJ)
Last edited:

nosoup4u

Member
Premium Subscriber
Joined
Jan 30, 2002
Messages
1,884
Location
High Bridge, NJ
I'm glad you enjoyed it. The feed wasn't all that great, and 3 minutes before the launch a bunch of systems all connected and messed up the feed. Then to top it all off, our power went out 30 minutes later.

As the hurricane season picks up, I'll be connecting to the voip wx net (http://www.voipwx.net/) and patching it over to the same repeater. I'll let everyone know when we do that.
 
Status
Not open for further replies.
Top