If I program multiple sites into the G5 for a single site will the pager automatically switch between which one it can pick up best or does it wait until it drops signal from the first one it locks on to?
Best one
I also live on the MD Eastern Shore and routinely listen to the Talbot system (site 6). Occasionally when I switch between listening to conventional vhf pager tones and the trimmed system I'll see it lock on to site 5, but this usually results in no audio unless there is a Talbot radio affiliated with that site causing the tgids that I'm interested in to be broadcast from there.I have the entire First system hmtjat covers the upper Eastern Shore of Maryland programmed and it seems to be doing well. Although I managed to turn off every department and can't seem to get any department turned back on.
Sent from my iPhone using Tapatalk
Although I managed to turn off every department and can't seem to get any department turned back on.
Sent from my iPhone using Tapatalk
Sometimes after it is on for a while, my G4 will go "silent" like it's lost the signal. When I power off then on, I immediately start receiving. Not sure why. Maybe system switching to a different control channel frequency?
Sometimes after it is on for a while, my G4 will go "silent" like it's lost the signal. When I power off then on, I immediately start receiving. Not sure why. Maybe system switching to a different control channel frequency?
I thought I recall seeing something like this quite some time ago under certain conditions that I cannot recall at this point. Other than which system(s) I was monitoring at the time, the only other thing that has really changed (for me) is the firmware versions....
As with most products where firmware changes, each version seems to have it's own "quirks". Having said that, since the Phase 2 upgrade of my G5 and subsequent release/installation of the latest firmware, I've seen almost no issues and the audio is great.
Is your unit Phase 2 running the latest f/w?
There's probably nothing wrong with it but I'd also be curious to take a look at your profile.
Monitoring the TOPAZ RWS, Mesa/Gilbert, AZ Primarily Gilbert PD. Yes, Phase II as purchased from Ray's, firmware is V1.00-T08.
Hum, please forgive my ignorance. I have exported the profile but not sure how to attach it here, only certain file types allowed from what I can tell.