sp50 squelch

[peterp1]

Hi,
I have 2 sp50 radios that I got programmed to work with my radius sp 10 radios.
They all work fine except for when I let go of the push to talk button on the sp10, I get a loud squelch noise from the sp50 radios (kind of like a hissing sound). I think it may be something to let the sp50 know that the person on the sp10 let go of the push to talk button.
The 2 sp50's don't do this when used by themselves, they only do it when used with the sp10's and the sp10's don't do this when used by themselves.
Is there a setting in the programming for this not to happen on the sp50's?

Thanks

 

[DPapay]

In the SP50 RSS, there is a setting, "Unmute/Mute Type", you could set it to AND/OR, then you could program the OPT button for "Squelch", hitting this button tightens the squelch up slightly. If these do not work then a squelch alignment could be done in the RSS. I believe both radios already have a preset "squelch tail eliminator" so there is nothing you can do with that.

 

[peterp1]

Changing the"Unmute/Mute Type" to AND/OR worked.
Now I get the squelch from the sp21 radio any ideas on this one?

Thanks