SSTV 14230
- Thread starter k8krh
- Start date
- Status
I use MMSTV. MMSSTV - HamSoft Not much to it.. I listen mostly.
I sometimes go to 14.230 MHz and see what's being sent. I just leave it running and come back after a half hour or so to see what images I've gathered up. I've also used it to copy images from the International Space Station and I've managed to grab a few pictures sent by Pirate Short Wave stations.
I sometimes go to 14.230 MHz and see what's being sent. I just leave it running and come back after a half hour or so to see what images I've gathered up. I've also used it to copy images from the International Space Station and I've managed to grab a few pictures sent by Pirate Short Wave stations.
Last edited:
Try MMSSTV, though I'm sure there are other SSTV decoding programs out there.
ka3jjz
Wiki Admin Emeritus
Quite a few, actually. Some dedicated, others have SSTV as one of the modes it uses (like MultiPSK, for instance). We have a nice starter list here...and not just Windoze, either
wiki.radioreference.com
Additional links welcome
Mike
HF Software Decoders - The RadioReference Wiki
Additional links welcome
Mike
This thread reminded me about an SSTV received image web page. It covers different parts of the world. One can use it to see if and how well a transmission is received. I think it is still active. Hmm...some images are very old and some are new.
www.g0hwc.com
10 App Tài Xỉu Online Uy Tín Xanh Chín Nhất Việt Nam (9/2024)
G0HWC.COM là trang chơi Tài Xỉu Online uy tín nhất Việt Nam hiện nay. Review top App Game đánh Tài Xỉu trực tuyến tốt nhất 2024 xanh chín, minh bạch, nhiều ưu đãi cho thành viên mới.
www.g0hwc.com
ind224
Member
+1 MMSSTV
ka3jjz
Wiki Admin Emeritus
There's some for the Mac and Linux, too
www.sigidwiki.com
Mike
Slow-Scan Television (SSTV) - Signal Identification Wiki
Slow-scan television (SSTV) is a method for picture transmission used by amateur radio operators to transmit and receive images.
Mike
Set RX Mode to 'Auto'. (It's at the top of the column of buttons running vertically in the center of the window'.
The software will identify the incoming signal and use the appropriate mode to decode it and display it on the screen.
And yes, 14.230 is the most active frequency.. (There's some SSTV going on there as I type this).
The software will identify the incoming signal and use the appropriate mode to decode it and display it on the screen.
And yes, 14.230 is the most active frequency.. (There's some SSTV going on there as I type this).
n2nov
Active Member
Set the radio to upper sideband and the MMSSTV to auto as mentioned above.
- Status
