-
Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.
We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.
If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html
SDR# TETRA Demodulator Trunk Tracking Demonstration
- Thread starter thewraith2008
- Start date
- Joined
- Nov 22, 2016
- Messages
- 518
I noticed a small BUG when I'm using SINGLE mode.
If the option: "Create Call Activity CVS - NO CALLS" is checked, the TTT window starts to display information. Even if "Suppres Lockout Messages" is enabled.
The Tbm drop-down window (F12) displays gray information.
In dual mode these things do not occur. If you have a way, I thank you!
If the option: "Create Call Activity CVS - NO CALLS" is checked, the TTT window starts to display information. Even if "Suppres Lockout Messages" is enabled.
The Tbm drop-down window (F12) displays gray information.
In dual mode these things do not occur. If you have a way, I thank you!
To create that file TTT must be always on MCCH.
The 'Call details' panel and remote window will show these set-ups (grayed out) because they are calls that are on a different carrier.
Calls that are on same carrier as MCCH should play as normal.
Suppress lockout messages won't apply here as this mode "Create Call Activity CVS - NO CALLS" is about logging all setups.
This limitation does not affect dual mode.
Thanks for sharing but the documents describes the "Hyperframe_or_Cipher_key_flag"
I was asking about the "Cipher_key" under "Advanced_link_supported" and the representation of the value.
I am trying to analyze the security of the network
-what security class it uses?
- is OTAR used?
and to know more about TETRA systems