• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

tk-7150 DTMF

Status
Not open for further replies.

Theroofable

Member
Premium Subscriber
Joined
Apr 14, 2010
Messages
42
Hi, I need some help with the software on this unit. I have put dtmf codes in the auto dial list. I need to figure out how to set up the radio so that I can send the code when needed. I know on other radios I have setup there is a memory recall option in the key assignment, but I cant seem to find on for these. I know I can set up another channel for a pttid with the dtmf but would rather be able to access the list. Any help is appreciated!
 

ramal121

Lots and lots of watts
Premium Subscriber
Joined
Dec 5, 2008
Messages
2,105
Location
Calif Whine Country
If you have your autodial list filled out, then just program a key for "Auto telephone"
Hit that key, scroll to the one you want and press PTT.
 

Theroofable

Member
Premium Subscriber
Joined
Apr 14, 2010
Messages
42
Thanks for the help, but that isnt the right one. Its strange that auto dial and mem rcl arent options in the key assignment. Any other ideas?
 

ramal121

Lots and lots of watts
Premium Subscriber
Joined
Dec 5, 2008
Messages
2,105
Location
Calif Whine Country
OK I tried it on my 8150 and you're right it doesn't work.This is from the help file:
"To recall the DTMF Memory items specified here, hold keypad [*] for 1 second then press [0][0] to [3][2] using an optional microphone with a DTMF keypad to select the Auto Dial Memory List/Memory number. The display shows the Memory Name or Memory Code."

So I guess a DTMF mic is required for autodial. Don't see any reference to a panel button. Learn something everyday...
 
Status
Not open for further replies.
Top