• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Transmitting Tones HT-750

Status
Not open for further replies.

Drachen_Fire

Member
Joined
Feb 28, 2013
Messages
414
Location
Center Township, PA
There is no tone standardization in the CPS for the Waris series, so yes it will do Plectron tones. My previous fire department used two Plectron tones for alerting that they've had since the 1960's, and the HT1250 does it just fine.
 

SteveC0625

Order of the Golden Dino since 1972
Premium Subscriber
Joined
Oct 24, 2009
Messages
2,795
Location
Northville, NY (Fulton County)
IIRC, the 750's can't do QCII encode or decode. You'll need a 1250 for that. (I'm not near my programming lap top to verify that but I do know for sure that the CDM750's won't do QCII.)
 

SteveC0625

Order of the Golden Dino since 1972
Premium Subscriber
Joined
Oct 24, 2009
Messages
2,795
Location
Northville, NY (Fulton County)
The HT750 can decode QC-II, however cannot encode it. The HT1250 can encode and decode

Thanks for filling in the blank. I'm way up in the Adirondacks on a camping trip and all my quick reference stuff is on my desk at home.

But that does confirm for the OP that he can't initiate pages fron the HT750.
 
Status
Not open for further replies.
Top