• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

TxWarn P-25 Katy Area

Status
Not open for further replies.
Joined
Dec 2, 2007
Messages
11
#1
Hello guys!

I need a little help with my programming. I have a Uniden BCD436HP and am monitoring the TxWarn P-25 System through the San Felipe site. I get a good amount of radio traffic, and programmed other sites and "talkgroups" in another favorites list. Here is my issue, I programmed Clodine and programmed agencies like Pct. 5 Harris County, HCSO D-4, and Katy PD. I'm not hearing squat out of this site, even when searching for ID's and with full signal. Another issue, I programmed Houston General Government Services Simulcast Site and programmed the HPD "T" channels. Not getting anything from them either, but when I do ID Search, the layer channels pop up. Any suggestions and help would be greatly appreciated.
 

KevinC

Moderator
Super Moderator
Joined
Jan 7, 2001
Messages
4,390
Location
Somewhere other than home :(
#2
GGSL for HPD requires the "MA" talkgroups, which are FDMA.

Example...

30184 75e8 D HPD Cent MA Central Dispatch Mutual Aid (General Government Services Layer)

The "Clodine" site will carry very little traffic and probably zero Public Safety. You need to use site 1-53 Ft Bend Simulcast for those agencies.
 
Joined
Dec 2, 2007
Messages
11
#3
GGSL for HPD requires the "MA" talkgroups, which are FDMA.

Example...

30184 75e8 D HPD Cent MA Central Dispatch Mutual Aid (General Government Services Layer)

The "Clodine" site will carry very little traffic and probably zero Public Safety. You need to use site 1-53 Ft Bend Simulcast for those agencies.
Thanks, KevinC for the quick response. So, what sites are proper for me to program the "T" channels for HPD?
 
Status
Not open for further replies.
Top