BC125AT: Uniden 125xlt

stuart3009

Member
Joined
Jun 4, 2023
Messages
36
Have my uniden 125xlt all programmed but recently it’s not picking up hardly anything I’ve check all frequency and there all updated I’ve just antenna all good could there be a fault or shall I wipe it and start again
 

stuart3009

Member
Joined
Jun 4, 2023
Messages
36
I’m trying, but, what does that mean?

Have you tried tuning to your local weather freq? What is your squelch set at?
Squelch set at 2 it was working fine few weeks ago now I mite get 2/ 3 frequencies out of all my banks
 

Scan125

Member
Joined
Apr 30, 2014
Messages
601
Location
UK
I suspect as the user is using a UBC125XLT then he is in the UK/EU and does not have the US WX (Weather) Service/Broadcasts.
 

stuart3009

Member
Joined
Jun 4, 2023
Messages
36
Yes correct I’m from uk and have tested my antenna and it’s working fine with a altimeter
 

Scan125

Member
Joined
Apr 30, 2014
Messages
601
Location
UK
Yes correct I’m from uk and have tested my antenna and it’s working fine with a altimeter
What has an altimeter got to do with your scanner reception. It is quite rare for a basic antenna to go "toes up" so I think your issue is elsewhere.

It could be that your UBC125XLT has failed but to check you need to tune to a 24 Hour frequency such as VOLMET.

Web search for your regional VOLMET service.
 

Scan125

Member
Joined
Apr 30, 2014
Messages
601
Location
UK
What has an altimeter got to do with your scanner reception. It is quite rare for a basic antenna to go "toes up" so I think your issue is elsewhere.

It could be that your UBC125XLT has failed but to check you need to tune to a 24 Hour frequency such as VOLMET.

Web search for your regional VOLMET service.
Oooops

Sorry, my error, VOLMET is on HF frequencies (Europe West 3413, 5505, 8957, 13264) so out of range of your scanner.

Doing an Airband search is your best bet depending on your location.
 
Top