• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

Uniden BCD436HP Wireless Powered

Status
Not open for further replies.

mike_s104

Member
Premium Subscriber
Joined
Aug 25, 2004
Messages
4,665
Location
Berkeley Co. WV/ Loudoun Co. VA
#3
Cool. Where did you find your sma adapter?
For the antenna? It came with it. I use these for my 396XT and 396T.

BNC Adapters
BNCJ-SMAP

For the wireless powering, I used a microUSB QI receiver and an angled miniUSB cable. I cut the cable to length, pealed back the sticky tape like covering, desolder (braid works best for this application), stripped the USB cable, and soldered the black and red wires to negative and positive on the QI receiver pad.
 
Status
Not open for further replies.
Top