• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

UniTrunker website down??

Status
Not open for further replies.

MedicDavid78

Member
Premium Subscriber
Joined
Jul 7, 2010
Messages
457
Location
The Astro25mosP25ere
#1
Is anyone else experiencing an issue on UniTrunker’s website at the Downlaods page? I went there to check if there was any new versions and the entire Downloads section is giving me a “404 - Error” message like the site is down. Thanks!
 
Joined
Nov 22, 2016
Messages
494
#3
Was only there about a week ago. Like webstar22 said links are busted. But downloads where still there.

UniTrunker-1.0.32.7 was the last stable.​

and

UniTrunker-1.0.33.5preview the last preview.​
 
Joined
Nov 22, 2016
Messages
494
#7
Sweet, I remember hearing rumblings about v2 when Unitrunker still kicked around on RR.

Only thing I use Unitrunker for these days is multi frequency VCO POGSAG receiver.
 

KD8DVR

Member
Premium Subscriber
Joined
Apr 11, 2004
Messages
1,112
Location
Columbus, Ohio
#8
Sweet, I remember hearing rumblings about v2 when Unitrunker still kicked around on RR.

Only thing I use Unitrunker for these days is multi frequency VCO POGSAG receiver.
Should be able to join without mod approval. Can get download links from the first message posted on each new release.

Sent from my SAMSUNG-SM-G920A using Tapatalk
 

KD8DVR

Member
Premium Subscriber
Joined
Apr 11, 2004
Messages
1,112
Location
Columbus, Ohio
#10
So is there no longer a stable public release of Unitrunker without joining Google groups?
The latest version 1 is it for version 1. Version 2 is in beta and can only be accessed from the Google group. He's concentrating on building v2. It is very useable now.

Sent from my SAMSUNG-SM-G920A using Tapatalk
 
Joined
Nov 22, 2016
Messages
494
#12
Signed up (about hour or so to get approval)

Latest preview is UniTrunker-2.0.0.67

Snippet of the welcome message:
Folks interested in bleeding edge software can read the announcement and decide whether the next preview is worth the effort and risk of installing. In some cases, new releases result in data and configuration file changes that are not reversible.
You don't need to update to it for the sake of it. Expect challenges.

Also the download page is back up.

UniTrunker-1.0.33.6
Is the latest there with no preview listed.
Preview releases are on Google Group now.
 
Joined
Nov 22, 2016
Messages
494
#14
I used to use Unitrunker for MPT-1327 but I didn't like how it always quit from a call (a fixed) 30 seconds after call start. I don't know if that changed at all with the v2 previews.

I ended up writing a program that linked SDR# and Trunkview to follow the calls.
 
Status
Not open for further replies.
Top