• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

VIPER Statewide Radio System Discussion

NathanJ

Member
Premium Subscriber
Joined
Sep 18, 2006
Messages
218
Location
HGPNNCXB43F

N1GAW

Member
Premium Subscriber
Joined
Jul 15, 2014
Messages
1,585
Location
Raleigh, NC

n8yid

Member
Premium Subscriber
Joined
Jan 20, 2003
Messages
100
Location
Preble County, Ohio
Gentlemen,

Just getting back from a vacation in the Blue Ridge, Georgia area....

While I was down in the area, I had some playtime with the Laptop and DSD+ and was able to get a bit of updated VIPER information (I believe) for the Western portion of your great State....but, I may need some help getting things sorted out; due to the fact; that this system is not a "familiar" one for me...

First off, I believe the Chunky Gal Gap site (2.24) may be completely incorrect, as listed in the DB here....

DSD+ reports this site as follows:
BSI = WQRW897
853.0375 (CC)
854.4625 (sCC)
855.9625
856.2625
858.4875

NL: 2.40, 2.52, 2.67 & 2.89
 

n8yid

Member
Premium Subscriber
Joined
Jan 20, 2003
Messages
100
Location
Preble County, Ohio
Secondly,

caught CC traffic from the Joanna Bald site (2.52)....
DSD+ reported back a Neighbor List that had a site 2.72 using 853.4750....

Searched the VIPER site list for that and couldn't find it. So, I searched out the 853.4750 frequency on the FCC website and found this:

North Carolina State Highway Patrol
WQSM447
Potato Knob, Bryson City, Swain County, NC
851.4750
852.050
852.425
852.775
853.225
853.475

Possible new site for the List?
 

Zbizzle911

Member
Joined
Jan 18, 2019
Messages
22
Was going through thomasville today. Snapped this pic of the new tower at the golf course. Looks like they’ve hung quite a bit of stuff on it since I went through there last.






Sent from my iPhone using Tapatalk
 

CarolinaClodhopper

Was Trucker_Tom
Joined
Feb 13, 2013
Messages
495
Good morning Viper Gurus, living in Ashe county which transmits on VHF. Other than the assigned TG's for Ashe county what other TG's would you suggest to program in for Viper?
 

drayd48

Member
Premium Subscriber
Joined
Nov 4, 2012
Messages
368
Location
Statesville NC
You could do Highway Patrol for your area which I believe is Troop 4 District 2, along with the statewide event channels, maybe neighboring counties if you want to listen in
 

N1GAW

Member
Premium Subscriber
Joined
Jul 15, 2014
Messages
1,585
Location
Raleigh, NC
In addition to what @drayd48 has suggested, I would suggest (depending on your listening choices) the VCROAM & VCPOOL channels, MAMA and Landing Zones 51579-51584 TGs, NCDPS Dist 23 51647 & prisons statewide 51679-51687, DPRR channels, State EMOC and HART 51939-52010, SHPSOSHQ (SHP special ops TG) 52222, SBI, and the fed talkgroups. Not all of them are active on a regular basis but when they are they have some interesting comms.
 

N1GAW

Member
Premium Subscriber
Joined
Jul 15, 2014
Messages
1,585
Location
Raleigh, NC
who is using a radio I'd not talk group 3000004 heard on event talk group ?
I've heard/seen that several times, and not totally sure, but was leaning towards unassigned/loaner radios based on the past times I've seen it (only seen on event talkgroups).

N1GAW
 

Ridgerunr

Newbie
Premium Subscriber
Joined
May 28, 2011
Messages
1
Location
Mechanicsburg, PA
Does anyone have a .kml or .kmz file of the VIPER transmitter sites? I would like to get one to overlay on Google Earth Pro.
Radio Reference has an online map to view but no means to download.
 
Top