• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

VX400 ARTS feature Programming problem

Status
Not open for further replies.

cdesigns

Member
Joined
Feb 4, 2009
Messages
1
Location
Clermont, FL
I just got 4 VX400 UHF radios and I have the CE24 software for them, but I have no option to turn on the ARTS (Auto Range Transpond System) feature on this radios anywhere.
 

T1poirier

Member
Joined
Oct 3, 2016
Messages
8
In the CE24 software the ARTS option is not automatically shown. You will need to read your radio, then select the VIEW menu option, drop to ITEM and then select the ARTS option at the bottom. This should add the ARTS option to each channel, you can then set it per channel I believe from there.
 

cdesigns

Member
Joined
Feb 4, 2009
Messages
1
Location
Clermont, FL
In the CE24 software the ARTS option is not automatically shown. You will need to read your radio, then select the VIEW menu option, drop to ITEM and then select the ARTS option at the bottom. This should add the ARTS option to each channel, you can then set it per channel I believe from there.

Thanks for the info, It works now
 
Status
Not open for further replies.
Top