The reference page on this site shows the following settings for San Mateo
County trunked system:
Base = 482.0000 / 488.000
Offset = 12.5 / 12.5
Spacing = 380 / 560
So I understand the concept of multiple base and offsets. My confusion
is understanding how to program this into Win96. On the 'Channel' page,
there are three boxes in the upper right hand corner:
Base Frequency / Offset / Step Size
...clear enough... Now the secod range appears to be programmable
via the 'Extended Tables' button. It brings up a table that has the
following columns:
CH Lo / CH Hi / Base Frequency / Offset / Step
There are six entries possible in the table, I didn't want to mess with the
first five, because it looked like 'valid' data. So here's my guess:
Ch Lo = 380
Ch Hi = 759
Base = 488.000
Offset = 560
Step = 12.5
Is this right? Thanks!
County trunked system:
Base = 482.0000 / 488.000
Offset = 12.5 / 12.5
Spacing = 380 / 560
So I understand the concept of multiple base and offsets. My confusion
is understanding how to program this into Win96. On the 'Channel' page,
there are three boxes in the upper right hand corner:
Base Frequency / Offset / Step Size
...clear enough... Now the secod range appears to be programmable
via the 'Extended Tables' button. It brings up a table that has the
following columns:
CH Lo / CH Hi / Base Frequency / Offset / Step
There are six entries possible in the table, I didn't want to mess with the
first five, because it looked like 'valid' data. So here's my guess:
Ch Lo = 380
Ch Hi = 759
Base = 488.000
Offset = 560
Step = 12.5
Is this right? Thanks!