• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

X G100 Programming Questins

Status
Not open for further replies.

eccradiotec

Member
Joined
Jan 26, 2007
Messages
83
I have a XG-100, I have a few questions. Can you add firmware for Narrow Band and EDACS? The radio's feature list says wide band and no info on if it also includes narrow band. I have RPM 10.1.1.15 , is there a issue which version to use or will this version work on all XG-100 radios. I don't want o start trying to program this radio and turn it into a brick. The software version on the radio says 12082-8900-2.0.18. I know I have multiple questions but I appreciate any help someone can give me . Yes I know misspelled the title
 
Last edited:

DisasterGuy

Member
Joined
Aug 24, 2013
Messages
1,255
Location
Maryland Shore
100p or 100m? The 100p doesn't do edacs and the 100m will only do edacs with the ch-721 head and appropriate feature.

Sent from my SM-G900V using Tapatalk
 

eccradiotec

Member
Joined
Jan 26, 2007
Messages
83
it's a 100p, do they all have narrow band or was that an option......feature list says p-25 conv, trunking but no p-25 trunking , so does that mean no p25 trunking? I hear that is an expensive option to get installed on radio?
 
Status
Not open for further replies.
Top