XPR XPR 8400 codeplug

[VE2VXT]

Hello everyone, I need your help!

I have an XPR 8400 VHF repeater that was programmed with a password, I need to clone it with a blank codeplug.
Does anyone have a sample or blank codeplug for an XPR 8400 model # M27JQR9JA7BN.

You can reach me in private at ve2vxt@gmail.com

Thank you
Eric VE2VXT

 

[gman1971]

In the CPS folder you'll find a bunch of blank codeplugs.

C:\Program Files (x86)\Motorola\MOTOTRBO CPS\samples

 

[KG4INW]

Install firmware on your programming computer (equal to or newer than what is currently installed) and perform a Device Recovery. That should give you a default codeplug without a password.

 

[gman1971]

Install firmware on your programming computer (equal to or newer than what is currently installed) and perform a Device Recovery. That should give you a default codeplug without a password.

OP asked for a blank codeplug, and those available on the CPS samples folder. Doing a recovery requires having the firmware installed, or available to install, plus it has other implications.

 

[KG4INW]

If OP can find a codeplug with not only matching model number but also feature set and codeplug version (i.e. written with matching CPS and perhaps matching Tanapa as well) then they can try to clone that in but I never could get it work when trying to blank out a password protected TRBO radio. Device Recovery always worked though provided there wasn't anything else wrong.

You should be able to use Tuner to save the separate tuning configuration ahead of time (always a good idea anyway) but I don't recall having any issues with recovery. Checking alignment on a service monitor should be done regardless since it appears this repeater is new to the OP.

 

[gman1971]

I understand, but not everyone has tuner either. There is always a risk involved when doing a recovery. The default codeplugs on the cps16 samples folder have always worked for me.

G.

 

[tweiss3]

Neither my CPS16 or CPS2.0 have a sample for XPR8400. The R7 sample did pop up in the current version of 2.0 though.

 

[gman1971]

Neither my CPS16 or CPS2.0 have a sample for XPR8400. The R7 sample did pop up in the current version of 2.0 though.

Thanks tweiss3, you are right, no XPR8400 on the samples folder... so, I take it back.

I guess the recovery might be the only option then, hopefully the repeater didn't have too many entitlements EIDs enabled...

G.

 

[KG4INW]

It's possible that EIDs can be wiped out but not always. I don't recall losing any before but there is a way to recover licenses. However I'm not sure how well that'd work with a second-hand repeater. See Wayne Holmes' excellent blog: This simple "trick" can solve an unusual problem.

Still, even by default XPR8400s are pretty feature filled but yeah, don't want to lose any purchased features.

 

[gman1971]

Recovery always wiped EIDs for me, had to recover them all...

If no XPR8400 default codeplug sample is available, then like you said, recover is probably the only way to do this.

G.

 

[Oz1lla]

Hej alle sammen, jeg har brug for jeres hjælp!

Jeg har en XPR 8400 VHF-repeater, der var programmeret med en adgangskode, jeg skal klone den med et tomt kodestik.
Er der nogen, der har en prøve eller et tomt kodestik til en XPR 8400 model # M27JQR9JA7BN.

Du kan kontakte mig privat på ve2vxt@gmail.com

tak skal du have
Erik VE2VXT

jeg havde samme problem som password på min xpr8400, kan jeg også få en kopi fra kodeploggen min vhf repeater
,Post
,bennyoz1lla@gmail.com

I have an XPR 8400 VHF repeater that was programmed with a password, I need to clone it with an empty code slot.
Does anyone have a sample or blank code connector for an XPR 8400 model #M27JQR9JA7BN.

 

[com501]

Say what?

 

[Tony_dl]

Hi everyone

Please share me XPR8400 sample codeplug.

quang@itadsolutions.com

Thanks !!!!!

 

[VA7PWT]

Hi everyone

Please share me XPR8400 sample codeplug. I to can not find a sample code plug.
Greatly apprieciated
ptryon2@gmail.com
VA7PWT