• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

xts 3000 astro

Status
Not open for further replies.

mmckenna

I ♥ Ø
Joined
Jul 27, 2005
Messages
23,892
Location
Roaming the Intermountain West
using same setup as other radios sorry.
...
1 mile

OK, so if you are using the same files as the other radios that worked, that means it's very likely a fault with this radio.

Have you tried swapping antennas with a known good radio?

If that doesn't fix it, you could try returning it via e-Bay, since it seems to be faulty. Or you can find a Motorola shop and get them to pop it on the service monitor.
 

rich1125

Member
Premium Subscriber
Joined
Jan 4, 2015
Messages
127
moto shop said was good i thought antenna too , guess i got e played ?
 

Ant9270

The Green Weenie
Joined
Aug 31, 2018
Messages
493
Open up Astro tuner if you have it. Something is telling me the radio you bought was last used for non affiliate scan and someone turned the TX power and deviation all the way down, like mmckenna posted above.
 

mmckenna

I ♥ Ø
Joined
Jul 27, 2005
Messages
23,892
Location
Roaming the Intermountain West
Open up Astro tuner if you have it. Something is telling me the radio you bought was last used for non affiliate scan and someone turned the TX power and deviation all the way down, like mmckenna posted above.

Maybe, but not something that should be adjusted without it hooked up to a service monitor. Randomly adjusting the settings is not a good approach.

If the seller sold the radio as having been benched and checked, then there's an issue that needs to be sorted out on e-Bay.

Buyer beware.
 

rich1125

Member
Premium Subscriber
Joined
Jan 4, 2015
Messages
127
yes sir going back no i took it to moto shop by me they said all looked good go figure.
 

Ant9270

The Green Weenie
Joined
Aug 31, 2018
Messages
493
yes sir going back no i took it to moto shop by me they said all looked good go figure.


Would you like me to take a look at your codeplug before you go through the headache of a return policy?
 

rich1125

Member
Premium Subscriber
Joined
Jan 4, 2015
Messages
127
i actually got it sir it was wrong info on radio reference but i truly appreciate all your help sorry i have not been on here in awhile i have gotten sick , you been a great help all you guys are great thank you. happy easter gentlemen and ladies be safe.
 

kjl13

QRT
Joined
Mar 8, 2018
Messages
431
i actually got it sir it was wrong info on radio reference but i truly appreciate all your help sorry i have not been on here in awhile i have gotten sick , you been a great help all you guys are great thank you. happy easter gentlemen and ladies be safe.

No problem, glad you got it fixed.


Sent from my iPhone using Tapatalk
 
Status
Not open for further replies.
Top