bcd 396xt

scanman312 · #1 (**permalink**) 10-25-2009, 06:13 PM

I just bought a new 396xt scanner and I programmed it with the ARC500 program I have Digital and conventional frequencies in it. My question and problem is When the scanner is scanning it show a flashing HOLD in the upper left hand corner and only scans 1 system. I have several systems programmed in it. Can anyone please help.

tampatracker · #2 (**permalink**) 10-25-2009, 06:27 PM

Press down on the hold button until you hear a beep, and that will get you out of "system hold".

gregjolly · #3 (**permalink**) 10-25-2009, 06:39 PM

also just a heads up....you cannot program a 396XT with ARC500. probably just a typo .

KE4ZNR · #4 (**permalink**) 10-25-2009, 10:55 PM

Quote:

Originally Posted by gregjolly

also just a heads up....you cannot program a 396XT with ARC500. probably just a typo .

Glad I am not the only one to notice that. ARC500 will not work with any of the Uniden XT scanners.
Marshall KE4ZNR

scanman312 · #5 (**permalink**) 10-27-2009, 11:08 AM

Thanks guys for the help. It worked the HOLD stopped flashing and it is scanning fine now . Also I mityped the program I used I used the Arc xt pro Thanks again