RadioReference on Facebook   RadioReference on Twitter   RadioReference Blog
 

Go Back   The RadioReference.com Forums > Commercial, Professional Radio and Personal Radio > Vertex Standard


Vertex Standard - Discussions regarding Vertex Standard professional and public safety radio equipment.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1 (permalink)  
Old 10-09-2017, 6:52 PM
Newbie
   
Join Date: Dec 2010
Posts: 1
Default Trouble Programming VX-261

Good evening,

We have a mix of Vertex 231s and 261s. I'm able to program and alter the 231s with no issue via CE99, but anytime I read or upload to the 261s, it wipes the 261 to one single default channel (not even one of the ones in the program file). I'm using CE150 to program the 261s with an off-brand connector. The connector works fine for the 231s.

Anyone had a similar issue?
Reply With Quote
Sponsored links
  #2 (permalink)  
Old 07-23-2018, 8:51 PM
Newbie
   
Join Date: Jul 2018
Posts: 1
Default

i am having this same problem, i have updated firmware, tried the software on multiple computers using windows 7 and windows 10. Not able to find a fix for this.
Reply With Quote
  #3 (permalink)  
Old 08-28-2018, 4:54 PM
Member
   
Join Date: Feb 2018
Location: FN22AC
Posts: 24
Default

I've successfully programmed my VX-261, using a cable purchased on ebay from KJ6ZWL. Here's the skinny:

Windows 10
CE150 v2.04 USA (narrowband version)
VX-261 running firmware 1.10 (originally had 1.06 but I found a 1.10 updater and it worked).

The file you are uploading must be in the same directory as the CE150.exe. Additionally, I set compatibility to Windows XP SP3, and run as administrator.
Reply With Quote
  #4 (permalink)  
Old 09-07-2018, 3:27 AM
Member
   
Join Date: Feb 2018
Location: FN22AC
Posts: 24
Default

And, I spoke too soon. Successfully programmed in 8 channels, went back to add two more and it reverted to the previously described behavior. Now Iím on the fence whether to send it for repair or toss it on eBay for parts.


Sent from my iPhone using Tapatalk
Reply With Quote
  #5 (permalink)  
Old 10-03-2018, 10:08 PM
Newbie
   
Join Date: Oct 2018
Posts: 1
Default

I am also having the same problem. anyone have any fix for it yet?

Mine is VX-261, FW 1.10. Using a 3rd party cable. I am able to read from the radio, but not able to write anything.
Reply With Quote
Sponsored links
  #6 (permalink)  
Old 11-08-2018, 11:24 PM
Member
   
Join Date: Feb 2018
Location: FN22AC
Posts: 24
Default

Well, Iíve been playing around with my VX-261 some more, and decided to sit down and thrash on it some more. I bought a membership to vertexradiogroup.net and downloaded every single firmware and CPS version, as well as the wideband reset tool. Figured there has to be a combination that will work.

I will post more info and software versions tomorrow, I'm at work now, using the radio and it's performing flawlessly.

Don't give up on it!


Sent from my iPhone using Tapatalk
Reply With Quote
  #7 (permalink)  
Old 11-09-2018, 12:45 PM
Member
   
Join Date: Feb 2018
Location: FN22AC
Posts: 24
Default

So, here's the breakdown on the combination of settings that wound up sticking. I ran the following in a Virtualbox VM of Windows 8.1, as I've heard CE150 does not work correctly with Win10.

1. CE150 version 2.05 EXP (NOT the narrowbanded US version)
2. Firmware 1.05.00
3. USB programming cable from KJ6ZWL, as mentioned above

I first tried the firmware writer FW7. Used the FW7 binary from the 1.08.00 firmware zip file. All firmware writes were successful.

Next I tried the Wideband Recovery Tool 1.03 (other versions did not have the VX-261/264 listed in the menu), as I had previously tried to use a US version of CE150, without much success. The Wideband Recovery Tool failed in every instance, stating "Product Type Error".

Next, I installed CE150 2.05, over top the US-version CE150 2.04 that I had previously installed. Every attempt to read the radio failed with "Product Type Error", until I selected the lowest available baud rate (38400). Now, it read and wrote to the radio using the default codeplug file included with the CE150 installation.

Now that CE150 and the radio were talking to each other, I attempted to program a code plug I had previously put together. I placed this codeplug in the CE150 program directory, renamed the default codeplug to something else, and renamed MY codeplug to reflect the name of the default (in my case, default261ud.CE150). It worked on the first try!

I have not attempted to change any settings yet, since it is working. That's a project for another day. Hope this helps someone out. All software was sourced from vertexradiogroup.net.
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 3:38 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
All information here is Copyright 2012 by RadioReference.com LLC and Lindsay C. Blanton III.Ad Management by RedTyger
Copyright 2015 by RadioReference.com LLC Privacy Policy  |  Terms and Conditions