DSDPLUS PRO-668

[ILL-099]

Can the pro-668 be programed to follow any of the systems that DSD+ supports other than p25?

 

[mel1718]

I use it exclusively for a Provoice system and it works great, mounted a winbook TW700 in my truck for a moble setup.

 

[RayAir]

Yes. You'll need DSD+ installed on your computer.
Go to DSDPlus | Digital Decoder and download 1.074.

Go into your scanner settings on your 668 and turn the IF setting to HP or HP/SP.

You'll need the HP or HP/SP on or DSD+ won't work.

 

[ILL-099]

Ok so Provoice can be programed as a standard EDACS system?Ive been playing around with dsd+1.074 for a couple weeks now,there is a load of NXDN traffic in this area.Ive been using the limit search function and have compiled voice and control frequencies for NXDN network.So ive put those voice frequencies in a scan list and removed the delay,this works ok if there isn't alot of traffic.Is there a way to program NXDN in this scanner so i can follow talkgroups?And what about DMR will that work with this scanner or do i need to get some usb tuners?Thanks

 

[DSDPlus]

Get two inexpensive DVB-T dongles. No shipping charge if you buy two of these:

Amazon.com: NooElec NESDR Mini USB RTL-SDR & ADS-B Receiver Set, RTL2832U & R820T Tuner, MCX Input. Low-Cost Software Defined Radio Compatible with Many SDR Software Packages. R820T Tuner & ESD-Safe Antenna Input: Electronics

You will be able to do so much more with them vs a scanner.


If you have, or get, any decent antennas, you may also want two of these:

Amazon.com: RF coaxial coax cable assembly BNC female to MCX male right angle 6'': Computers & Accessories

 

[ILL-099]

Get two inexpensive DVB-T dongles. No shipping charge if you buy two of these:

Amazon.com: NooElec NESDR Mini USB RTL-SDR & ADS-B Receiver Set, RTL2832U & R820T Tuner, MCX Input. Low-Cost Software Defined Radio Compatible with Many SDR Software Packages. R820T Tuner & ESD-Safe Antenna Input: Electronics

You will be able to do so much more with them vs a scanner.


If you have, or get, any decent antennas, you may also want two of these:

Amazon.com: RF coaxial coax cable assembly BNC female to MCX male right angle 6'': Computers & Accessories

10-4 Thanks for the links and DSD+.The program is very good,its hard to get me away from the pc.Im already setup in the antenna department,have a st2 65 feet up.