AZWIN P-25 Phase-1 & the G 5 Pager Phase 1 and 2

[cookmaster]

good morning all,i been trying to Monitor AZWIN down here in Tucson on the MT,Lemmon ,Tumamoc,and Keystone sites,when i program them in as one or multiple sites i get a massage saying out of range this can not be true i can see one of the sites from my house,i did check the WACN ID it's BEE00,and the system ID 15A,and the RFSS is 1 and the Site ID is 25 this is for Tumamoc site info, has anybody else in Tucson area,or Phoenix area had success in monitoring this system,if so how did you program it and thanks?

 

[KevinC]

I believe the site ID needs to be in hex, which would be 19.

 

[cookmaster]

thanks Kevin that was it,after i changed all the site ID's for the three sites the G 5 is working Flawlessly on AZWIN and for that mater its working Flawlessly on PCWIN too, thanks again!

 

[KevinC]

thanks Kevin that was it,after i changed all the site ID's for the three sites the G 5 is working Flawlessly on AZWIN and for that mater its working Flawlessly on PCWIN too, thanks again!

You're welcome!