MCA204M/N, power supply, 2 patch cables BNC/SMA Male, two terminators, Data Sheet
MCA204M is a active multicoupler designed to distribute VHF/UHF antenna signals to four (4) receivers without loss and with high isolation between ports. It is specifically suited for signal intercept and VHF/UHF monitoring stations, both fixed or mobile platforms. It can be used in any monitoring post using receivers, scanners or spectrum analyzers.
MCA204M has a mechanical and electrical design construction that will meet any government, military or commercial specification. This unit is designed to give high performance results in any radio monitoring post using multiple intercept receivers. Rugged die-cast aluminum enclosure with a black powder coat finish.
Frequency Range: 25 MHz to 1 GHz 4-Ports
Nominal Impedance: 50 ohm
Port-To-Port isolation (min): 22 dB
Return Loss (all ports): > 20 dB
P1dB = 17 dBm (output) 3OIP = 32 dBm (output
Coupler Gain/Loss: +2 dB to -1 dB (max) over frequency range
RF Connectors: BNC (standard)
Mechanical: 4.375 X 2.375 X 1.250 inches (L.W.H)
Case: Die cast Aluminum, Black powder coating (standard)
DC Power Connector: 2.1/5.5mm coaxial (standard)
DC Power Requirements: +12VDC (nominal) @ 85 mA
Payment via Paypal only - not friends and family. Please use this link for payment: paypla.me/hitfactor PayPal account not required, may use any Credit/Debit card.
Priority shipping to U.S. only. Insurance and shipping is included.
MCA204M is a active multicoupler designed to distribute VHF/UHF antenna signals to four (4) receivers without loss and with high isolation between ports. It is specifically suited for signal intercept and VHF/UHF monitoring stations, both fixed or mobile platforms. It can be used in any monitoring post using receivers, scanners or spectrum analyzers.
MCA204M has a mechanical and electrical design construction that will meet any government, military or commercial specification. This unit is designed to give high performance results in any radio monitoring post using multiple intercept receivers. Rugged die-cast aluminum enclosure with a black powder coat finish.
Frequency Range: 25 MHz to 1 GHz 4-Ports
Nominal Impedance: 50 ohm
Port-To-Port isolation (min): 22 dB
Return Loss (all ports): > 20 dB
P1dB = 17 dBm (output) 3OIP = 32 dBm (output
Coupler Gain/Loss: +2 dB to -1 dB (max) over frequency range
RF Connectors: BNC (standard)
Mechanical: 4.375 X 2.375 X 1.250 inches (L.W.H)
Case: Die cast Aluminum, Black powder coating (standard)
DC Power Connector: 2.1/5.5mm coaxial (standard)
DC Power Requirements: +12VDC (nominal) @ 85 mA
Payment via Paypal only - not friends and family. Please use this link for payment: paypla.me/hitfactor PayPal account not required, may use any Credit/Debit card.
Priority shipping to U.S. only. Insurance and shipping is included.