Is there a way to 'hold' on a specific control channel if you are scanning a list of control channels (multi-site)?
I know you can press 'pause' on a talkgroup and it will hold on the talkgroup, but what about control channel?
You are talking about holding on a CC so that you can `analyze' it? (Either via the scanner itself or with something like PRO96com software? [With whatever software you may be using you'll have to use whatever command it asks for to start receiving data from the scanner.])
If that is what you are asking then it goes like this:
1A: If you are already listening to a Talkgroup just press the F2 key under `TSYS' and go to step 2:
1B: Press the `Manual' key.
2: Look at the display and you'll see `Analyz' above the F# key.
3: Press the F3 key.
(If it isn't the CC you are interested in then press the Up or Dn `Arrow' on the `5-way' pad and it will either `advance' [Numericly] w/ the Dn `Arrow' or `decline' [Numericly] w/ the Up `Arrow')
4: To return to scanning just press the `Scan' key.
The `left' & `Right' Arrows will move you through the `scanlists' and then you can do the previous keystrokes to `analyze' the CCs in those scanlists that have `TSYSes'.
Hope that helps?